12mm - 10mm conversion bearing
NZ$39.00
In stock
SKU
KS6-802055
This conversion bearing is used to fit piston kits with 10mm pin to engines that normally take 12mm pins. This allows you to use, for example, one of our 10mm Minarelli type big bore engine kits on 12mm gudgeon engines or rods. Also could be used to fit Suzuki or Yamaha 10mm gudgeon pin pistons to Honda conrods.
This small/little end bearing from Germany features high quality alloy cage, hardened steel needle rollers. Size 10x17x13 (10mm pin, 17mm OD [or conrod ID], 13mm long).
NOTE: does not suit CPI conrods manufactured after 2003 and other Minarelli type engines with 12mm pin, as they have 16mm ID conrod small end.
This conversion bearing is used to fit piston kits with 10mm pin to engines that normally take 12mm pins. This allows you to use, for example, one of our 10mm Minarelli type big bore engine kits on 12mm gudgeon engines or rods. Also could be used to fit Suzuki or Yamaha 10mm gudgeon pin pistons to Honda conrods.
This small/little end bearing from Germany features high quality alloy cage, hardened steel needle rollers. Size 10x17x13 (10mm pin, 17mm OD [or conrod ID], 13mm long).
NOTE: does not suit CPI conrods manufactured after 2003 and other Minarelli type engines with 12mm pin, as they have 16mm ID conrod small end.
SKU | KS6-802055 |
---|---|
Manufacturer | Stage 6 |
Write Your Own Review