24mm PWK racing performance carburetor
NZ$145.00
In stock
SKU
24M629
Ok for racing!
This PWK is a big carburetor that can increase your scooter's performance. This is the new PowerJet version with an additional circuit to control mixture under load and high RPM for the maximum power output. The larger diameter venturi and intake funnel offer lower resistance through increased laminar flow and reduced flow losses. This carb can give you more power, torque and better response and is especially beneficial to big bore engines or tuned engines. Works best with a big manifold, please see the 'Intake' category for the right one for your bike.
This PWK type carburetor features technology developed for racing engines, including:
Revolutionary PowerJet system for boosted power when you need it
chrome flat slide
optimum funnel shape for fastest intake flow
high flowing venturi
plug at bottom of bowl for quick jet swaps
manual choke mechanism (lever sold separate)
This suits all performance 2 and 4 stroke engines 50cc - 150cc. For two strokes, you should run premix but it is possible to use the provided nipple on this carb. The carburetor body is physically bigger than some factory ones, in some rare cases there may not be enough room to mount it exactly in the factory position. Some intake modification may be needed for some scooters, and some scooters will need the additional throttle cable (product code THRM14).
Recommended for use with Scootling's 50mm pod filter (product code POD-B01PK).
Sample image shown, the actual carburetor has a bigger venturi than this.
(carburator, carburettor)
Ok for racing!
This PWK is a big carburetor that can increase your scooter's performance. This is the new PowerJet version with an additional circuit to control mixture under load and high RPM for the maximum power output. The larger diameter venturi and intake funnel offer lower resistance through increased laminar flow and reduced flow losses. This carb can give you more power, torque and better response and is especially beneficial to big bore engines or tuned engines. Works best with a big manifold, please see the 'Intake' category for the right one for your bike.
This PWK type carburetor features technology developed for racing engines, including:
Revolutionary PowerJet system for boosted power when you need it
chrome flat slide
optimum funnel shape for fastest intake flow
high flowing venturi
plug at bottom of bowl for quick jet swaps
manual choke mechanism (lever sold separate)
This suits all performance 2 and 4 stroke engines 50cc - 150cc. For two strokes, you should run premix but it is possible to use the provided nipple on this carb. The carburetor body is physically bigger than some factory ones, in some rare cases there may not be enough room to mount it exactly in the factory position. Some intake modification may be needed for some scooters, and some scooters will need the additional throttle cable (product code THRM14).
Recommended for use with Scootling's 50mm pod filter (product code POD-B01PK).
Sample image shown, the actual carburetor has a bigger venturi than this.
(carburator, carburettor)
SKU | 24M629 |
---|
Write Your Own Review