'Twist Control' Clutch spring slider kit 105mm
NZ$48.15
In stock
SKU
KNK900.45
OK for racing!
This nifty mechanism featuring steel ball bearings stops torsion forces building up in your clutch during normal variator movement.
This means that your clutch's torque cam is free to move in its helical trajectory in response to all variation in engine output, road demand and throttle application. Especially effectively on tuned engines but possible to use in all applications.
Ensure you clean and lightly grease this to install. It increases the spring preload a little so may change the roller setting.
To suit most clutches with 105mm ID clutch outer (bell), including Adly SF-50, CPI / CMG scooters etc.
OK for racing!
This nifty mechanism featuring steel ball bearings stops torsion forces building up in your clutch during normal variator movement.
This means that your clutch's torque cam is free to move in its helical trajectory in response to all variation in engine output, road demand and throttle application. Especially effectively on tuned engines but possible to use in all applications.
Ensure you clean and lightly grease this to install. It increases the spring preload a little so may change the roller setting.
To suit most clutches with 105mm ID clutch outer (bell), including Adly SF-50, CPI / CMG scooters etc.
KMF84.105
| SKU | KNK900.45 |
|---|
Write Your Own Review
Related Products
Check items to add to the cart or
We found other products you might like!
-
Stage 5 Adly GTA-50From NZ$8.32 Regular Price NZ$8.99
To NZ$1,185.32 Regular Price NZ$1,281.38
-
Stage 5 Adly GTC-50From NZ$8.32 Regular Price NZ$8.99
To NZ$1,174.22 Regular Price NZ$1,269.38
-
Stage 5 Adly SF-50 Silver FoxFrom NZ$8.23 Regular Price NZ$8.90
To NZ$1,349.79 Regular Price NZ$1,459.18