Drive belt for Honda Zoomer / Ruckus
NZ$68.00
In stock
SKU
ZM-02
High quality Kevlar blend drive belt made in Japan. These belts are made and tested to very high standards. Good upgrade for standard or tuned bikes. Tension strength is up to 10,000N or more.
Replace belts every 3000-5000km to maintain optimum acceleration and top speed, and to avoid breakage. 1mm wear on the side of a belt can cost 3km/h top speed.
To suit the models below.
Honda Zoomer / Ruckus (all 50cc)
Designed and manufactured in Japan by a major manufacturer to strict quality standards. All drive belts must be run in before normal use by keeping speed under 30km/h for at least the first 5km.
High quality Aramid (Kevlar) blend drive belt made in Japan. These belts are made and tested to very high standards. Good upgrade for standard or tuned bikes. Tension strength is up to 10,000N or more.
Replace belts every 3000-5000km to maintain optimum acceleration and top speed, and to avoid breakage. 1mm wear on the side of a belt can cost 3km/h top speed.
To suit the models below.
Honda Zoomer / Ruckus (all)
These belts are designed and manufactured in Japan by a major manufacturer to strict quality standards. All drive belts must be run in before normal use by keepng speed under 30km/h for at least the first 5km. We strongly recommend you download and read our 'Drive belt fitment' pdf, in the 'Manuals & User guides' category of this shop. Claims regarding premature drive belt failure will only be considered if you have downloaded that file.
| SKU | ZM-02 |
|---|---|
| Manufacturer | KN-Kikaku |
Write Your Own Review
Related Products
Check items to add to the cart or
We found other products you might like!
