Suzuki OEM drive belt type 1 - standard size
Out of stock
Only %1 left
SKU
27601-43E00
High quality standard size drive belt designed in Japan to OEM specification. Replace belts every 3000-5000km to maintain optimum acceleration and top speed, and to avoid breakage. 1mm wear on the side of a belt can cost 3km/h top speed. This is a Suzuki genuine part.
To suit:
AZ50, AZ50T
Let's
Let's II / Let's II S / G / L / DX (CA1KA any pre-emissions control model)
CA1PB ZZ
Verde 2t 50 (all)
CA1PA Let's II (post-emissions control)
Sample image shown. May take an extra day to procure from supplier
These belts are designed and manufactured in Japan by a major manufacturer to strict quality standards. All drive belts must be run in before normal use by keeping speed under 30km/h for at least the first 5km.
High quality standard size drive belt designed in Japan to OEM specification. Replace belts every 3000-5000km to maintain optimum acceleration and top speed, and to avoid breakage. 1mm wear on the side of a belt can cost 3km/h top speed. This is a Suzuki genuine part.
To suit:
AZ50
Let's
Let's II / Let's II S / G / L / DX (CA1KA any pre-emissions control model)
CA1PB ZZ
Verde
CA1PA Let's II (post-emissions control)
These belts are designed and manufactured in Japan by a major manufacturer to strict quality standards. All drive belts must be run in before normal use by keepng speed under 30km/h for at least the first 5km. We strongly recommend you download and read our 'Drive belt fitment' pdf, in the 'Manuals & User guides' category of this shop. Claims regarding premature drive belt failure will only be considered if you have downloaded that file.
| SKU | 27601-43E00 |
|---|
Write Your Own Review
Related Products
Check items to add to the cart or
