Kevlar drive belt Honda AF20E engine
NZ$75.00
In stock
SKU
7029SS
Kevlar blend, top quality standard size drive belt. Replace belts every 3000-5000km to maintain optimum acceleration and top speed, and to avoid breakage. 1mm wear on the side of a belt can cost 3km/h top speed.
To suit:
Honda 50cc with AF20E engine: Broad, Cabina, Lead, Joker
These belts are designed and manufactured in Japan by a major manufacturer to strict quality standards. All drive belts must be run in before normal use by keepng speed under 30km/h for at least the first 5km.
Kevlar blend, top quality standard size drive belt. Replace belts every 3000-5000km to maintain optimum acceleration and top speed, and to avoid breakage. 1mm wear on the side of a belt can cost 3km/h top speed.
To suit:
Honda 50cc with AF20E engine: Broad, Cabina, Lead, Joker
These belts are designed and manufactured in Japan by a major manufacturer to strict quality standards. All drive belts must be run in before normal use by keepng speed under 30km/h for at least the first 5km. We strongly recommend you download and read our 'Drive belt fitment' pdf, in the 'Manuals & User guides' category of this shop. Claims regarding premature drive belt failure will only be considered if you have downloaded that file.
SKU | 7029SS |
---|---|
Manufacturer | KN-Kikaku |
Write Your Own Review