Performance CDI for earlier Yamaha Jog CV50

OK for racing! SPECIAL ONLINE ONLY PRICE - NOT AVAILABLE IN SHOPS Performance parts maker Daytona (Japan) has released this "Progress Racing" analogue CDI for the earlier CV50 Jog. It features advanced circuitry to derestrict the top RPM, and provide improved timing at all RPM. Simple plug and play operation. This will work on standard Jogs, and is recommended for light - mildly tuned scooters too (intake, exhaust, pulley kit etc). Check fitment info below carefully. This unit is used to delimit the models below for more top speed, and can help other performance parts develop more power. Daytona recommends this unit for use with 5.5g rollers, also available on this site.  Sample image shown. To suit models generally '00 to '05 below, make sure to check this fitment list against the white sticker inside your seat compartment: CV50 Jog (5SU1, 5SU2, 5SU3, 5SU4, 5SU6 [SA16J]) Jog ZR imported with remote control, '01 - '05 Super Jog, Super Jog ZR made in '00 only Vino 5AUE to 5AUL Testimonial 5 September 2008 "It is noticeably faster in acceleration, and really makes a difference above 40km/h. I reckon conservatively it does 75km/h, if not more. It kicks ass away from a standstill" F.C., Auckland (Standard 2006 CV50 Jog fitted with Progress Racing CDI) Daytona states: Note that fitment of tuning parts makes the engine run at higher RPM than factory settings, this sometimes requires carb retuning. Especially when fitting in conjunction with exhaust chambers, please check that your bike does not run lean after fitting of this part!