Performance CDI Yamaha Jog CV50 '06 on

OK for racing! SPECIAL ONLINE ONLY PRICE - NOT AVAILABLE IN SHOPS Performance parts maker Daytona (Japan) has released this "Progress Racing" analogue CDI for the CV50 Jog. It features advanced circuitry to derestrict the top RPM, and provide improved timing at all RPM. Simple plug and play operation. This will work on standard Jogs, and is recommended for light - mildly tuned scooters too (intake, exhaust, pulley kit etc). This unit is used to delimit the models below for more top speed, and can help other performance parts develop more power. Daytona recommends this unit for use with 5.5g rollers, also available on this site. To suit Jog models generally from 2006 onward, make sure to check this fitment list!: CV50 Jog (5SU7/B, 5SU8/C, 5SUA [SA16J]) CV50 Jog (5SU9, [SA16J]) Jog Z, Z II (also with remote control, 5SW6, 5SW8) Jog ZR (also with remote control, 5SW5, 5SW7) Jog BJ (5XN4 - 6) Check your scooter's model code by looking under the seat for a white sticker. On that sticker, for instance 5SU9-010 would mean a 5SU9 model, and therefore this CDI will work for you. Testimonial 5 September 2008 "It is noticeably faster in acceleration, and really makes a difference above 40km/h. I reckon conservatively it does 75km/h, if not more. It kicks ass away from a standstill" F.C., Auckland (Standard 2006 CV50 Jog fitted with this CDI) Testimonial 9 August 2012 "I bought a CDI upgrade from you a few months ago and it's been great - the bike is much better now..." P.Y., by email Daytona states: Note that fitment of tuning parts makes the engine run at higher RPM than factory settings, this sometimes requires carb retuning. Especially when fitting in conjunction with exhaust chambers, please check that your bike does not run lean after fitting of this part!   Note old part number was 63403