Aramid (Kevlar) blend, oversized drive belt, good for Yamaha 50cc and 90cc engines (and Minarelli 50cc, Taiwanese and Chinese horizontal 2 stroke) with high speed pulleys fitted. Width is standard, length is marginally longer than standard to allow full use of bigger diameter high speed pulleys.
Oversize kevlar drive belt, made in Japan. Note this is for performance applications only - may make standard scooters go slower!
Can be fitted to the models below in conjunction with other performance transmission parts.
Axis 90 (all)
Jog 90 (all)
Vino (all 2 stroke)
Super Jog ZR, Super Jog Z, Aprio Type 2, Jog ZR, Jog Space Innovation, Jog (3KJB/C/D, 5BM1, 5KN1/2)
Jog CV50 / CV50R
Axis 50, Axis 50 Profoot
Aprio ('96 to '00)
Jog Poche, 7PS Jog/Z/EX, Aprio '93 to '95
6.8ps Jog/Sports Jog Z '91,'92, Jog 3RY Jog 3KJ1 to H
Plus Minarelli engines, Taiwanese horizontal 2 stroke, and most Chinese 2 stroke 50cc-90cc scooters These belts are designed and manufactured in Japan by a major manufacturer. All drive belts must be run in before normal use by keepng speed under 30km/h for at least the first 5km.
Aramid (Kevlar) blend, oversized drive belt, good for Yamaha 50cc and 90cc engines (and Minarelli 50cc, Taiwanese and Chinese horizontal 2 stroke) with high speed pulleys fitted. Width is standard, length is marginally longer than standard to allow full use of bigger diameter high speed pulleys.
Oversize kevlar drive belt, made in Japan to OEM standard or higher. Note this is for performance applications only - may make standard scooters go slower!
Can be fitted to the models below in conjunction with other performance transmission parts.
Axis 90 (all)
Jog 90 (all)
Vino (all 2 stroke)
Super Jog ZR
Super Jog Z
Aprio Type 2
Jog ZR
Jog Space Innovation
Jog (3KJB/C/D, 5BM1, 5KN1/2)
Jog CV50 / CV50R
Axis 50
Aprio ('96 to '00)
Jog Poche
Axis 50 (Profoot)
7PS Jog/Z/EX
Aprio '93 to '95
6.8ps Jog/Sports
Jog Z '91,'92
Jog 3RY
Jog 3KJ1 to H
Plus Minarelli engines, Taiwanese horizontal 2 stroke, and most Chinese 2 stroke 50cc-90cc scooters
These belts are designed and manufactured in Japan by a major manufacturer. All drive belts must be run in before normal use by keepng speed under 30km/h for at least the first 5km. We strongly recommend you download and read our 'Drive belt fitment' pdf, in the 'Manuals & User guides' category of this shop.
