CVT holder tool for Yamaha and clone 2t 50-100cc
NZ$35.99
In stock
SKU
MBU5496
Italian made tool for holding the CVT end of the crankshaft steady while you loosen/tight the central nut. Fits the toothed kickstarter pawl and secures to the engine casing during use. Suits most Yamaha 2 stroke 49cc - 100cc models including:
Jog (all horizontal 2 stroke) including CV50
Vino (all 2 stoke)
Axis (all 2 stroke)
Adly models:
Silver Fox SF-50
Gatecrasher GTC-50
GTA-50
Plus Minarelli and Taiwanese plus Chinese 2 stroke 50cc clones of the Yamaha engine. Hole spacing is 166mm
Italian made tool for holding the CVT end of the crankshaft steady while you loosen/tight the central nut. Fits the toothed kickstarter pawl and secures to the engine casing during use. Suits most Yamaha 2 stroke 49cc - 100cc models including:
Jog (all horizontal 2 stroke) including CV50
Vino (all 2 stoke)
Axis (all 2 stroke)
Adly
Silver Fox SF-50
Gatecrasher GTC-50
GTA-50
Plus Minarelli and Taiwanese plus Chinese 2 stroke 50cc clones of the Yamaha engine. Hole spacing is 166mm
| SKU | MBU5496 |
|---|
Write Your Own Review
Related Products
Check items to add to the cart or
